Beschreibung
Advance-LB3 LiPo BalanceCharger
- Als erstes muss das Ladegerät an der Steckdose eingesteckt werden.
- Dann muss der korrekte Modus (Lifepo für Lifepo Akkus und Lipo für Lipo Akkus) gewählt werden.
- Dann wird die Anzahl Zellen ausgewählt (7.4V = 2 Zellen, 9.9V und 11.1V = 3 Zellen)
- Dann wird der Akku am Gerät angeschlossen
- Dann wird ca 2 Sekunden auf Start gedrückt, der Ladevorgang beginnt
- Nachdem das Ladegerät signalisiert, dass der Akku geladen ist, wird der Akku vom Ladegerät entfernt
- Erst dann wird das Ladegerät von der Steckdose getrennt.
Advance-LB3 LiPo BalanceCharger
Powerful, user-friendly and practical charger with integrated balancer, it is suitable for Lipo and LiFePo batteries with two (7.4V) or three (11.1V) cells. The batteries are charged very reliably and safely, the installed 12 bit microprocessor monitors the charge and prevents overcharging and short circuits. The charging current can be set to 0.5 ampere, 1 ampere and 2 ampere, whereby 0.5 ampere in particular is most gentle on the battery. The 2 ampère charging current should only be used for batteries with at least 2000mAh capacity. The charger automatically detects when the battery is full and then stops the charging process, the unit then maintains the voltage and signals acoustically and visually that the battery is full.
Important instructions for operating:
First, the charger must be plugged into the socket.
Then the correct mode (Lifepo for Lifepo batteries and Lipo for Lipo batteries) must be selected.
Then select the number of cells (7.4V = 2 cells, 9.9V and 11.1V = 3 cells).
Then connect the battery to the unit
Then press Start for approx. 2 seconds and the charging process begins.
After the charger signals that the battery is charged, the battery is removed from the charger.
Only then is the charger disconnected from the socket.
Translated with www.DeepL.com/Translator (free version)